But in some cases it may be possible to remove this extra charge. This is an EVE-NG Server that includes Network Nodes needed to emulate a Viptela SD-WAN Network! This Server is based on a Dell R620 Hardware with 128GB RAM + 1TB Drive. This System actually implements 3 different Servers (each one is a separate Virtual Machine). Cisco CML-2 Server (Cisco Modeling Labs) version 2.1.2 (latest version) – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.67 (now replaced with CML-2) – EVE-NG Server (Emulated Virtual Environment-Next Generation) Community Edition version 2.0.3-112 Please notice that this is the Community Edition (free version), not the Pro version , which requires a License. By the way, we can also provide the Pro version if needed. The Hardware is a very quiet Dell R620 Server with 128GB RAM running VMware ESXi 6.5 This EVE-NG Server includes all the Network Nodes needed to emulate a Viptela SD-WAN Network! This includes the SD-WAN Controllers , also known as Control Plane Components: – vBond – vSmart – vManage And the WAN Edge Nodes , also known as the Data or Forwarding Plane Devices: – vEdge The SD-WAN Controllers use the most recently approved versions: 19.2.31 and 20.3.2 The WAN Edge Nodes can be implemented with the Viptela vEdge Software ; also versions 19.2.31 or 20.3.2 But they can also be implemented with the CSR1000v SD-WAN Router , which now can be managed by SD-WAN Controllers We include 2 versions of the CSR1000v SD-WAN Router: – CSR1000v with IOS XE version UCM-K9 16.12.5 – CSR1000v with IOS XE version Amsterdam 17.3.2 latest version! Please scroll down for a complete list of the Virtual Devices included with this Server. These are the main features of the Dell R620 used to build this Virtual Lab: – 2 x Quad Core Processors (Xeon E5-2609 or higher) – 4 x Gigabit Ethernet Interfaces – – 128GB RAM can grow up to 768GB! – 1TB Drive (can be upgraded to 1TB SSD or 2TB SSD) – Operating System: VMware ESXi 6.5 Raw Metal Virtualization OS Having your own Lab (own Physical Server) makes a lot more sense than Renting a Physical or Virtual one! This will really add up in the long run! Please attached image with Reference Prices. Note: Please notice that the Monitor is not included. You’ll need a Monitor and a Keyboard to operate this Server. Is a Free , Open Source Software that can be used to simulate complex networks. CML & VIRL are Cisco Licensed Software that can also be used to simulate complex networks. The main advantage of EVE-NG over CML is the fact that while CML provides a Cisco-only environment , EVE-NG is NOT limited to Cisco Devices! EVE-NG provides a Multi-vendor environment! That is, it allows you to emulate complex Networks with all kinds of Network Devices! Please scroll down for more specific differences between EVE-NG and CML. Please also notice that the item price doesn’t include the License for CML-2/VIRL. We’ll bill you the proper cost. Client Software NOT needed. VIRL, CML-2 and EVE-NG are VM’s that run on the Physical Dell Server. But these are just Back-End Processes that don’t have a User Interface! In order to actually use these VM’s you’ll need a separate computer (a regular PC), that will be the Client PC. The only exception is the VIRL VM, which does need a special Client Software to be installed in the Client PC. This special Software is called VM Maestro Client Software. Typical Management tasks include. Power up/Power down VM’s, Assign VLAN’s and Network Ports to the VM’s, etc. The ESXi Server can be managed using another special Software known as the vSphere Client , which of course must also be installed in the Client PC. Upgrade Options : Server comes with 128GB RAM. But RAM can grow up to 768GB! These are some other upgrade options available: – 1TB Hard Drive upgrade to 1TB SSD or 2TB SSD – HD can also be upgraded to RAID (RAID-1, RAID-5 or RAID-6). Please write to us for details about these Upgrade options. CML/VIRL Main Features : These are some of the most important features of the Cisco CML/VIRL Software : – Includes Official Cisco Images it is the only Tool fully Licensed and approved by Cisco! – Multiple Network Platforms (IOSv, IOSvL2, NX-OSv, IOS XRv, IOS-XEv and ASAv Firewall). CML/VIRL comes with a complete set of Legal and Fully Licensed Cisco IOS Images that are the same as those running on physical Routers & Switches. New Cisco IOS releases are provided in a regular basis. So you’ll always have the most up to date Virtual IOS Images! It supports the classic IOS Images found in common ISR Routers and Layer 2 Switches: IOSv & IOSvL2 It doesn’t support Layer 3 Switches yet, but it might do so in the near future. In addition to the classic IOS Images, VIRL supports advanced Platforms such as IOS XRv & XRv 9000 (used in Service Provider environments) It also supports the ASAv Firewall , that can be used for Security related tasks. Finally, it also supports IOS-XEv , which is the virtual version of the Cisco IOS XE Software that comes in the newest ISR Routers like the 42XX, 43XX and 44XX Series! Like GNS3, EVE-NG is Free because it doesn’t include the actual IOS Images needed to boot the Virtual Devices in your Network. Without the proper IOS Images, EVE-NG alone would be basically useless! Therefore, you’d need to provide these IOS Images and upload them to EVE-NG. GNS3 & EVE-NG Users normally struggle trying to find the proper IOS Images. However, our EVE-NG Server is already pre-loaded with multiple IOS Images! As mentioned before, our EVE-NG Server includes all the Network Nodes needed to emulate a Viptela SD-WAN Network! In addition, our Server is pre-loaded with the following IOS Images. Routers – Cisco IOSv Router version 15.9.3 – Cisco XRv Router version 6.3.1 – Cisco XRv-9K Router version 7.2.1 – Cisco CSR1000v SD-WAN Router with IOS XE version Amsterdam 17.3.2 Other Devices – Cisco ASAv Firewall version 9.14.1 – Cisco NX-OSv9K Nexus Switch version 9.2.4 – Cisco Layer-2 Switch with IOSv-L2 version 15.2. You can create multiple instances of these Virtual Devices, which are fully setup and ready to use! You can also implement many other Virtual Devices, provided that you upload the proper IOS Image for them. Bonus Software and Training Materials : This item includes a Disk (DVD) with the following Software and Training Materials : – VMware vSphere 6.0 Client Software (needed only for special purposes) – VMware ESXi 6.5 Operating System Installation Files (ISO CD Image) – mRemoteNG Connections Manager (provides Telnet/SSH access to the virtual devices) – VM Maestro Client Software (Maestro must be installed in a separate computer) – VIRL Training Videos (Videos about the installation, configuration and use of VIRL) – EVE-NG Training Videos (Links to YouTube Videos with useful EVE-NG Tips and Tricks). This Virtual Lab has been fully tested and. Therefore it’s guaranteed to work! I f you have any questions about the operation of this Virtual Lab, you can always count on us We’ve been providing Networking Training Kits for years with hundreds of very satisfied customers! Please notice that due to the complex nature of this item we need. 2-3 days for processing. (it depends on where you live). Thank you for looking! The item “EVE-NG Server + Cisco CML-2 Network Lab Dell R620 128GB CCNP CCIE Viptela SD-WAN” is in sale since Thursday, February 25, 2021. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Servers, Clients & Terminals\Computer Servers”. The seller is “training.kits” and is located in Gainesville, Florida. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Mexico, Canada, Australia.

• Model: R620
• RAID Levels: 0
• Type: Server
• MPN: Does Not Apply
• RAM Size: 128GB
• Brand: Dell
• Number of Processors: 2
• Product Line: PowerEdge
• Maximum RAM Capacity: 768GB
• Processor Manufacturer: Intel